Kobalt KPW 2N1 Скачать руководство пользователя страница 5

5

kobalttools.com

 

WARNING

To reduce the risk of injury, the user must read and understand the instructions before using  

this product.

•  To avoid personal injury and/or damage to property and to maximize your power washing 

experience, carefully follow all of the safety tips, instructions, warnings and safeguards and become 

familiar with all of the controls. Be sure you know how to quickly bleed off the pressure from all parts 

of your power washer, and how to turn off the power washer.

•  This power washer conforms to CSA and other safety and consumer standards. Do not modify or 

rebuild any part of your power washer.

•  

DO NOT

 use your power washer when you are under the influence of alcohol or drugs. Use this 

power tool carefully and only when you are alert. 

•  Watch your balance and footing while using your power washer. Surfaces become slippery when 

wet and are extra slippery when using a detergent or cleaner. 

•  

NEVER

 operate the power washer in bare feet, sandals, or open-toed shoes. 

•  When using the power washer near children, make sure they are closely supervised by an adult to 

avoid injury. Never let a child use the power washer. 

•  Keep fingers, hands, feet and any part of your body clear of the stream of high pressure water. The 

powerful spray can cause blindness or blast holes in the skin. It can break a window if you are too 

close when you pull the trigger on the spray gun.

 ALWAYS

 wear eye protection to prevent injury to eyes when operating the power washer.

•  To avoid mishaps or injury, always use the trigger safety lock when not using the power washer even 

if the spraying stops for a moment.

•  Point the spray gun in a safe direction when beginning a power washing session.

•  When first using the spray gun, hold the spray gun and lance with two hands when pulling the 

trigger (one hand to pull the trigger and the other to stabilize the gun assembly) until you get used to 

the “kickback” from the spray gun.

•  When you press the power switch to turn off the power washer, water pressure may remain in the 

system. To discharge the pressure, point the spray gun in a safe direction and pull the trigger.

•  

NEVER

 spray flammable liquids.

•  

NEVER

 use the power washer in areas that contain combustible dust, liquids or vapors.

•   Avoid contact of the pressure hose with sharp objects and examine the hose regularly. Replace if 

damaged. Due to the high pressure involved, it cannot be repaired if cut or damaged. 

•  Only use detergent specifically formulated for power washers and follow instructions on the 

detergent’s label. 

•  Protect eyes, lungs, and skin from exposure to detergent. Dish or laundry soap is too thick and will 

clog the nozzle of your detergent bottle.

IMPORTANT: 

Store the power washer indoors to prevent the water in the unit from expanding under 

freezing conditions. When the water freezes and expands, your power washer will be damaged and 

become inoperable. 

• NEVER

 use hot water with your power washer. It will overheat and damage the high pressure pump.

• 

NEVER

 leave the power washer unattended while it is powered “on”. 

•  

ALWAYS

 turn the water supply “on ” before turning the power washer power to “on”. Running the 

pump dry will cause damage to the internal components.

SAFETY INFORMATION

Содержание KPW 2N1





















Отзывы: