7
SAFETY INFORMATION
•
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts.
Loose clothes, jewelry, or long hair can be caught in moving parts.
Always wear eye protection. A hedge trimmer can throw foreign objects into your
eyes which could cause permanent eye damage. Always wear safety goggles with
side shields that are marked to comply with ANSI Z87.1. Ordinary eyeglasses have
only impact-resistant lenses; they are not safety goggles.
•
If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used.
Use of these devices can reduce dustrelated hazards.
POWER TOOL USE AND CARE
•
Do not force the power tool. Use the correct power tool for your application.
The correct power
tool will do the job better and safer at the rate for which it was designed.
•
Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
•
Disconnect the battery pack from the power tool before making any adjustments, changing
accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting
the power tool accidentally.
•
Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
Power tools are dangerous in
the hands of untrained users.
•
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tools operation. If damaged, have the
power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
•
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
•
Use the power tool, accessories and tool bits, etc., in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the power tool
for operations different from those intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
•
Ensure the switch is in the off position before inserting battery pack.
Inserting the battery pack
into power tools that have the switch on invites accidents.
•
Recharge only with the charger specified by the manufacturer.
A charger that is suitable for one
type of battery pack may create a risk of fire when used with another battery pack.
•
Use power tools only with specifically designated battery packs.
Use of any other battery packs
may create a risk of injury and fire.
•
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws, or other small metal objects that can make a connection from one terminal
to another.
Shorting the battery terminals together may cause burns or a fire.
•
Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
SERVICE
•
Have your power tool serviced by a qualified repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is maintained.
