11
KNOW YOUR HEDGE TRIMMER
To install the battery:
1. Align the battery (not included) with the cavity in the
housing.
2. Insert battery in the housing until battery release button
(J) locks into place. You should hear a “click” once it is
installed.
To remove the battery:
1. Press the battery release button (J) on the hedge
trimmer.
This will cause the battery to raise out of the tool
slightly.
2.
of the tool.
IMPORTANT:
The battery may not be fully charged
when purchased. Before using the hedge trimmer for the
charge. Make sure to read all safety precautions, and fol-
low the instructions in the battery and charger manuals.
OPERATING INSTRUCTIONS
WARNING
To avoid personal injury:
• Handle the blade with care.
•
could get pinched or cut.
• Never service the blade or hedge trimmer unless the battery is removed.
• Always keep both hands on the hedge trimmer handles to prevent your hand from touching
the blade.
The safe use of this product requires an understanding of the information on the product and in
this operator’s manual as well as a knowledge of the project you are attempting. Before use of this
product, familiarize yourself with all operating features and safety rules.
Guard
The guard (D) helps prevent the operator’s hands from slipping into the blades.
Trigger switch
The lock-out button (F) must be pressed either to the left or the right before the trigger switch (H) can
be depressed. The lock-out button (F) can be released after the tool has started.
BATTERY
1
2
J
J
