Kobalt KCS 4080-06 Скачать руководство пользователя

Страница: 4 / 32

SYMBOLS

Some of the following symbols may be used on this product. Please study them and learn their mean-

ing. Proper interpretation of these symbols will allow you to operate the product better and safer.

SYMBOLS DESIGNATION

EXPLANATION

Volts

Voltage

Amperes

Current

Hertz

Frequency (cycles per second)

Watts

Power

min

Minutes

Time

Alternating Current

Type of current

No Load Speed

Rational speed, at no load

/min

Per Minute

Revolutions, strokes, surface speed, orbits etc., per minute

Safety Alert

Precautions that involve your safety.

Wet Conditions Alert

Do not expose to rain or use in damp locations

Read The Operator’s Manual

To reduce the risk of injury user must read and
understand operator’s manual before using this product.

Eye and Hearing Protection

Wear eye protection that is marked to comply with
ANSI Z87.1 as well as hearing protection when
operating this product.

Gloves

Wear non-slip, heavy-duty protective gloves when
handling the chain saw and the blade.

Safety Footwear

Wear non-slip safety footwear when using this
equipment.

Kickback

Tip contact can cause the guide bar to move suddenly
upward and backward, which can cause serious injury.

Operate With Two Hands

Hold and operate the saw properly with both hands.

One Handed

Do not operate the saw using only one hand.

Bar Nose Contact

Avoid bar nose contact.

Содержание KCS 4080-06

































Результаты поиска

Содержание KCS 4080-06

Отзывы:

Похожие инструкции для KCS 4080-06

Бренды по названию

Популярные бренды

Kobalt KCS 4080-06, Руководство пользователя

Результаты поиска

Содержание KCS 4080-06

Отзывы:

Похожие инструкции для KCS 4080-06

Бренды по названию

Популярные бренды