Kobalt KCS 120-07 Скачать руководство пользователя

Страница: 10 / 35

UNPACKING

This product has been shipped completely assembled.

•

Carefully remove the product and any accessories from the box. Make sure that all items listed in

the package contents section are included.

•

Inspect the product carefully to make sure no breakage or damage occurred during shipping.

•

Do not discard the packing material until you have carefully inspected and satisfactorily operated

the product.

•

If any parts are damaged or missing, please call 1-888-3KOBALT (1-888-356-2258) for assistance.

WARNING

•

If any parts are damaged or missing, do not operate this product until the parts are replaced.

Failure to heed this warning could result in serious personal injury.

•

Do not attempt to modify this product or create accessories not recommended for use with this

leading to possible serious personal injury.

SAFETY INFORMATION

The following signal words and meanings are intended to explain the levels of risk associated with

this product.

Save these Instructions

SYMBOL

SIGNAL

MEANING

DANGER Indicates an imminently hazardous situation, which, if not avoided, will

result in death or serious injury.

WARNING Indicates a potentially hazardous situation, which, if not avoided, could

result in death or serious injury.

CAUTION Indicates a potentially hazardous situation, which, if not avoided, may

result in minor or moderate injury.

CAUTION (Without Safety Alert Symbol) Indicates a situation that may result in

property damage.

•

To avoid serious personal injury, do not attempt to use this product until you have read this

Owner’s Manual thoroughly and understand it completely. If you do not understand the warnings and

instructions in this Owner’s Manual, do not use this product. Call 1-888-356-2258 for assistance.

The operation of any power tool can result in foreign objects being thrown into your eyes,

which can result in severe eye damage. Before beginning power tool operation, always wear

safety goggles or safety glasses with side shields and, when needed, a full face shield. We

recommend a wide vision safety mask for use over eyeglasses or standard safety glasses with

side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

WARNING

SYMBOLS

Содержание KCS 120-07




































Результаты поиска

Содержание KCS 120-07

Отзывы:

Похожие инструкции для KCS 120-07

Бренды по названию

Популярные бренды

Kobalt KCS 120-07, Руководство пользователя

Результаты поиска

Содержание KCS 120-07

Отзывы:

Похожие инструкции для KCS 120-07

Бренды по названию

Популярные бренды