Kobalt K18ND-06A Скачать руководство пользователя страница 36

Страница: 36 / 79

SAFETY INFORMATION

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a

drugs, alcohol or medication.

A moment of inattention while operating power tools may

Protective equipment

such as dust mask, non-skid safety shoes, hard hat, or hearing protection, used for
% "

c) Prevent unintentional starting. Ensure that the switch is in the off-position before

connecting to a power source and/or battery pack, picking up or carrying the tool.

' % % % * %
switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on.

A wrench or a

! % "

e) Do not overreach. Keep proper footing and balance at all times.

This enables better

control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and

gloves away from moving parts.

: "%

moving parts.

g) If devices are provided for the connection of dust-extraction and collection facilities,

ensure that these are connected and properly used.

Use of these devices can reduce

; *

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your application.

The

% % " at the rate for which it was
designed.

b) Do not use the power tool if the switch does not turn it on and off.

Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power

tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power

tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use.

Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

Содержание K18ND-06A
















































































Результаты поиска

Содержание K18ND-06A

Отзывы:

Похожие инструкции для K18ND-06A

Бренды по названию

Популярные бренды

Kobalt K18ND-06A, Руководство пользователя

Результаты поиска

Содержание K18ND-06A

Отзывы:

Похожие инструкции для K18ND-06A

Бренды по названию

Популярные бренды