7
SAFETY INFORMATION
• When battery pack is not in use, keep it away from other metal objects, like paper
clips, coins, keys, nails, screws or other small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help.
Liquid ejected from the battery may cause irritation or burns
• Do not use a battery pack or tool that is damaged or modified.
Damaged or modified
batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire
or temperature above 130 °C may cause explosion.
• Follow all charging instructions and do not charge the battery pack or tool outside
the temperature range specified in the instructions.
Charging improperly or at
temperatures outside the specified range may damage the battery and increase the risk of
fire.
Service
• Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
• Never service damaged battery packs.
Service of battery packs should only be performed
by the manufacturer or authorized service providers.
Specific Safety Warnings for Polisher
Safety Warnings Common for Polishing:
• This power tool is intended to function as a polisher. Read all safety warnings,
instructions, illustrations and specifications provided with this power tool.
Failure to
follow all instructions listed below may result in electric shock, fire and/or serious injury.
• Operations such as grinding, sanding, wire brushing or cutting-off are not
recommended to be performed with this power tool.
Operations for which the power tool
was not designed may create a hazard and cause personal injury.
• Do not use accessories which are not specifically designed and recommended by the
tool manufacturer.
Just because the accessory can be attached to your power tool, it does
not assure safe operation.
• The rated speed of the accessory must be at least equal to the maximum speed
marked on the power tool.
Accessories running faster than their rated speed can break
and fly apart.
• The outside diameter and the thickness of your accessory must be within the
capacity rating of your power tool.
Incorrectly sized accessories cannot be adequately
guarded or controlled.
• Threaded mounting of accessories must match the polisher spindle thread. For
accessories mounted by flanges, the arbor hole of the accessory must fit the locating
diameter of the flange.
Accessories that do not match the mounting hardware of the power
tool will run out of balance, vibrate excessively and may cause loss of control.
• Do not use a damaged accessory. Before each use inspect the accessory such as
abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear,
wire brush for loose or cracked wires. If power tool or accessory is dropped, inspect
for damage or install an undamaged accessory. After inspecting and installing an
accessory, position yourself and bystanders away from the plane of the rotating
accessory and run the power tool at maximum no-load speed for one minute.
Damaged accessories will normally break apart during this test time.
Содержание 1694006
Страница 32: ...32 ...