21
CARE AND MAINTENANCE
8b
9. After 3-5 minutes, remove each item and use a clean dry towel to wipe
off the entire item and inspect it for any remaining paint or dirt to wipe
remains.
RE-ASSEMBLING SPRAY GUN
If paint or dirt debris is still present, use a non-wire soft bristle brush and
brush the area.
IMPORTANT:
To ensure all residue of material is removed from the part, use
a blow gun with an approved OSHA gun tip to blow any excess cleaning
solution off the part that a rag cannot get to.
NOTE:
NOTE:
DO NOT OVERTIGHTEN.
Soaking of parts may require longer to get all paint residue off the
part.
counterclockwise
1. Screw the Fluid Nozzle into the face of the
spray gun by turning it clockwise, using the
provided wrench (8 mm) to tighten securely
(See Figure 1a, 1b).
1b
Clockwise
1a
Clockwise
