KDC380 QG
Quick Guide
See Reference Manual for more detailed information.
to purchase additional products and accessories.
QG_KDC380_20220624 p7
In Always-pairing mode, an application can connect to a KDC without reading a pairing barcode, so the
connection procedure is a little different.
a)
In the KTSync app, tap the Connect icon at the bottom left of the app.
b)
In KTSync, tap “START BLE SCANNING” in the top right.
c)
In KTSync, check the list of found devices.
d)
In KTSync, tap the KDC380 listed by serial number in brackets followed by [BLE] that matches the serial
number found on the back side of the KDC380. The format will look like this, KDC380[xxxxxx] [BLE],
where xxxxxx is the serial number.
e)
The KDC380 will beep upon connection
and display “BLE SPP Connected” on its screen. Now it is
ready to use.
< Fig. 4>
