KoamTac KDC200 KDC250, Руководство по программированию

Страница: 16 / 24

KDC200 Programming Manual
‘S’ command
Parameters: The symbology selection (it is unsigned 32-bit number)
Format: ‘S xxxxxxxx #’ where xxxxxxxx is the value of parameter in hex.
Output: ‘!’ – invalid parameter.
‘@’ – all other times.
Purpose: Enables the selected symbologies.
Example: Sending “Sffffffff#” enables all the symbologies.
To select a symbology, set the appropriate bit to ‘1’ in the parameter.
Symbology bit# Symbology bit#
EAN13 0 EAN128 9
EAN8 1 Code93 10
UPCA 2 Code35 11
UPCE 3 BooklandEAN 12
Code39 4 EAN13withAddon 13
ITF14 5 EAN8withAddon 14
Code128 6 UPCAwithAddon 15
I2of5 7 UPCEwithAddon 16
Codabar 8 PDF417 31
‘s’ command
Parameters: None
Format: ‘s’
Output: ‘ xxxxxxxx @’ where xxxxxxxx is the selected symbologies and @ means the end of data
Purpose: Read the selected symbologies. Please see the table of command ‘S’ for detailed explanation of
each symbology.
‘T’ command