Cradle Power LED Status
Battery LED Status
Main Power
Status LED
Green
: Always on when the cradle is powered on
Orange
: Charging
Green
: Fully charged
Battery
Status LED
For all models other than the KDC180 with UHF, charge the
KDC180 by placing it into the cradle as shown below: (C)
Charging UHF Models (Optional)
Charging with a Protective Boot
Make sure the UHF spacer is installed and then place the
KDC180 UHF model into the cradle as shown below: (F)
1. Remove the No-Boot spacer from the cradle by pulling
the tab on the back of the spacer up. (D)
2. KDC180 devices other than UHF models can now be
charged while wearing a protective boot. To charge, place
the KDC180 into the cradle as shown below: (E)
UHF Spacer
How to Charge Your KDC180
*
KDC180W model with optional Inductive charging antenna
can be charged on both Qi compliant wireless charging pad
and charging cradle.
Tilt the battery as shown in the figure and mount it
in the battery slot. (G)
1010mAh Battery Charging
G