7
6
▶Select using FORWARD/BACK button
※The transmitter automatically memorizes each setting 1
second after changing. When switching transmitter off, wait
more than 2 seconds after changing settings.
Functions (1-27)
Procedure when running
Checking model: Confirm model to be used.
2.
Power on: Note surroundings and switch transmitter on, then switch receiver on.
1.
Checking movements: Raise wheels from ground and operate transmitter to check
movements. Detail adjustment using steering/throttle trim lever should be done while
running. Adjust steering balance by operating 8-figure running.
3.
Power off: Switch off in receiver, transmitter order and remove running battery.
4.
※Make sure to switch the transmitter on and off after an interval of at least 2 seconds.
■ Procedure when running／Functions (1-27)
MENU08：Steering sub trim‥‥‥
MENU09：Steering reverse‥‥‥
MENU05：Steering balance L‥‥
MENU06：Steering speed‥‥‥‥
MENU07：Steering curve‥‥‥‥
MENU02：Steering trim‥‥‥‥‥
MENU01：Steering monitor‥‥‥
P.7
P.7
P.7
P.7
P.8
P.8
P.8
P.9
P.9
MENU04：Steering balance R‥‥
MENU03：Steering travel‥‥‥‥
MENU12：Throttle high point‥‥
MENU13：Throttle brake ‥‥‥‥
MENU14：Throttle speed‥‥‥‥
MENU11：Throttle trim‥‥‥‥‥
MENU10：Throttle monitor ‥‥‥
MENU18：Throttle reverse ‥‥‥
MENU17：Throttle sub trim‥‥‥
MENU16：Throttle curve B ‥‥‥
MENU15：Throttle curve F ‥‥‥
P.9
P.9
P.10
P.10
P.10
P.11
P.11
P.11
P.12
MENU20：ABS speed‥‥‥‥‥‥
MENU19：ABS power‥‥‥‥‥‥
P.12
P.12
MENU21：3ch monitor ‥‥‥‥‥
MENU23：Adjust volume ‥‥‥‥
MENU22：3ch position setting‥
P.13
P.13
P.13
MENU24：Model reset ‥‥‥‥‥
MENU25：Model copy ‥‥‥‥‥
MENU26：Model name ‥‥‥‥‥
MENU27：Model select‥‥‥‥‥
P.14
P.14
P.14
P.14
Stand
8-figure running
Trim lever
