11
MENU17：Throttle sub trim
+ key
− key
b30 〜 0（Default setting） 〜 F30
▶This function allows you to adjust the edge of operation
and neutral position at the same time.
(Use when installing servo and test running)
MENU16：Throttle curve B
+ key
− key
50 〜 0（Default setting） 〜 ＋50
▶This function allows you to adjust throttle servo move-
ment on actual trigger operation (braking only).
MENU15：Throttle curve F
+ key
− key
50 〜 0（Default setting） 〜 ＋50
▶This function allows you to adjust throttle servo move-
ment on actual trigger operation (forward only).
■MENU 15〜17
※The whole operation angle including neutral position moves.
Use this function if you can not corrects neutral position by
adjusting servo horn or linkage.
Adjust "MENU11: Throttle trim" to adjust neutral position only.
When value of the sub trim gets bigger, adjust the linkage and
make it a smaller the value. In certain circumstances, too big
value may cause dead area (servo does not react) at the edge
of operation.
※The throttle response can be made quick (＋) or mild (−)
＋
makes quick at start, and mild later
−
makes mild at start, sensitive later
Quick curve (＋ values) reacts greatly at the start, and the
response becomes mild later
Mild curve (− values) reacts mild at the start, and the response
becomes sensitive later
When using with other function, check the effect one by one.
※The throttle response can be made quick (＋) or mild (−)
＋
makes quick at start, and mild later
−
makes mild at start, sensitive later
Quick curve (＋ values) reacts greatly at the start, and the
response becomes mild later
Mild curve (− values) reacts mild at the start, and the response
becomes sensitive later
When using with other function, check the effect one by one.
＋/− keys. Push both keys together to reset.
Adjust using
＋/− keys. Push both keys together to reset.
Adjust using
＋/− keys. Push both keys together to reset.
Adjust using
