background image

Hugo Müller GmbH & Co KG, Karlstraße 90, DE-78054 VS-Schwenningen

AS 36.x3 knx

Safety instructions / Intended use and inappropriate use  / Disposal

CAUTION! DANGER OF FIRE AND ELECTRIC SHOCK! 
!! Installation and assembly of electrical equipment must be carried out only by a skilled person !! 
 

 

Ÿ

Connect only to suitable supply voltage [KNX bus voltage (nominal voltage 29V)]. 

Ÿ

Warranty void if housing opened by unauthorized person! 

Ÿ

The electronic circuit is protected against a wide range of external influences. 

Ÿ

Incorrect operating may occur if external influences exceed certain limits! 

Ÿ

Installation and assembly of electrical equipment must be in accordance with national building, electrical and safety codes! 

Ÿ

Defective devices / sensors have to be put out of service immediately! 

Ÿ

Observe the regulations and instructions in the ZVEI/ZVEH handbook (building system technology). Especially the 
professional installation of the bus lines and the professional installation and start-up of KNX devices must be observed! 

Ÿ

The device fits for the particular use of the following tasks: acoustic signal.

Ÿ

The device is intended for use in accordance with the defined technical data. 

Ÿ

The device is not qualified for security relevant tasks.

Ÿ

The device can also be operated outdoor with the correct accessory. 

Ÿ

The inappropriate use of the device can cause damage to property and persons. 

Ÿ

The device has to be disposed in an environmentally friendly manner according to the current electrical codes!

Instruction manual 

via KNX bus voltage
< 12 mA without output signal
< 20 mA with output signal
KNX
 3 binary inputs
1 speaker output
10 volume steps
max. 0,45 W
4-8 Ohm
6 individual MP3-files 
12 preset tones
ETS5 or higher
 -10 ... 45 °C

self-extinguishing thermoplastic
44 x 41,5 x 20 mm

 60 mm incl. mounting ring

flush-mounting
push-in connector
IP20 according to DIN EN 60529
 III when installed according to regulations

Supply voltage
Bus current 

Bus system
Input
Output
Volume level
Speaker output
Impendance ext. speaker
Melodies

Applikation software
Permitted ambient 
temperature 
Housing
Dimensions AS26.01knx
Dimensions loudspeaker
Mounting
Type of connection
Type of protection
Class of protection

Technical data 

en

!

www.hugo-mueller.de 

BA AS36x3knx Hardware HM; de,en - 24404 - 2022.10V01

10

60

Massbild

AS36.03 knx chime interface

LA06.01 loudspeaker

Montage (AS26.11knx)

Connection diagram

Kabelanschluss

Disconnect the device from power supply for wiring and 
installation purposes! Check power supply is disconnected!  

Mounting (AS36.13knx)

Cable connection

Attention! You have to check and consider the 
safety instructions above!

 

LS +

INPUT 2

INPUT 3

LS -

INPUT 1

GND

1

2

3

4

5

6

1

2

3

4

5

6

KNX-Bus

LS -

LS +

INPUT 1

INPUT 2

INPUT 3

GND

Отзывы: