Chirp 3260 Hardware Installation Manual
2-1
2
INSTALLATION
This section provides installation information for the Chirp 3260 Echosounder.
2.1
System Dimensions
The Chirp 3260 is housed in a standard 19", 5U rackmount case. Due to the weight of the system it is recommended
that sliding rails or support rails be used as part of the installation. Final fastening points of the Front Panel are shown
in the drawing below.
CHIRP 3260 Front Panel Mounting Dimensions
The information contained in this document is proprietary data of Knudsen Engineering Limited. Any disclosure, use, or reproduction of this
information for other than the specified purpose intended is expressly prohibited unless agreed to in writing by Knudsen Engineering Limited.
D101-04965-Rev3
Page 5 of 9
