Knuckleduster Gunfighter's Ball The Alamo Saloon, Инструкция по эксплуатации

Страница: 7 / 10

5. Glue the bottom stage layer in place.
Make sure the nail holes and tread
marks are visible (smooth side-
down). Glue not only the bottom
side, but also the rear edge to add
support to the rear and side walls.
6. Glue the upper stage layer in place,
also applying glue to the rear edge.
7. Locate the tabs and holes for the
doorway wall of the backstage room
and glue down the bottom and side
edges as well as where it contacts
the stage.
8. Locate the holes for aligning the sol-
id wall of the backstage room and
glue it in place.
9. The finished interior should look
like the bottom photo. Set aside and
allow to dry completely before mov-
ing on.