manualshive.com logo in svg

KNS supertrack S3, Инструкция по установке и эксплуатации

Поделиться
Скачать
KNS supertrack S3 Скачать руководство пользователя страница 15

 

11 

 

2.6. Cable  Connection 

For the SuperTrack S3 to work, you must connect the RF cables to your satellite TV 

receiver(s). Each RF cable must be an RF (75 ohms) cable fitted with F-type 
connectors. The RF cables should already be connected to the antenna base plate. 
There should be two ~ five coax cables routed from the ACU to the Antenna unit 
according to your configurations. Note that Data and Power are transmitted through a 
single coax cable. 

This cable should be connected to the ACU labeled “RF 

connector of the antenna base plate” and the connector of the ACU labeled 

“ANTENNA.”

 The remaining coax cable routing depends on your configuration. Due 

to the signal polarization of the satellites, it is possible for the SuperTrack S3 to 
support more than two satellite TV receivers aboard a boat. To install more than two 
satellite TV receivers/TV pairs, an active multi-switch is placed between the Antenna 
Unit and the Satellite TV receivers. The following sections provide details for the 
installation of both a single satellite TV receiver and multiple satellite TV receivers. 
 
To connect the SuperTrack S3 to your satellite TV receiver(s), choose one of the 
following configurations (based on the number of satellite TV receivers you will 
connect to the antenna): 
 

Option 1 - Connecting one satellite TV receiver for one satellite 
Option 2 - Connecting one satellite TV receiver for satellite pairs with auto 
switching  
Option 3 - Connecting satellite TV receivers with European LNB 
Option 4 - Connecting multi satellite TV receivers with auto switching 

 

Connecting one satellite TV receiver for one satellite (Only use the ‘HH’ 

polarity of the satellite) 

 

One satellite TV receiver for one satellite is the simplest type of cable installation. Only 
two coaxial cables should be connected between the antenna unit and the satellite TV 
receiver, as shown in Figure 2-12. One end of the RF cable should already be 
connected to the connector labeled “RF4” on the base of the SuperTrack S3 antenna. 
Connect the other end of the RF4 cable to the satellite TV receiver connector labeled 
“LNB,” “ANT/SAT,” or “satellite IN.” And, the “ACU” connector of the antenna base plate 
must also be connected to the “ANTENNA” connector of the ACU. In this configuration, 
every satellite should be selected manually using the ACU. 

Содержание supertrack S3












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды