Hipso
™
Assembly Instructions
© Knoll, Inc.
Page
8 of 12
12.
When in position, lift the frame just enough to slide the
power supply holder under the crossbars but do not install
the power supply yet. Ensure the holder starts about 2"
from the motor housing.
2" space between
motor housing and
power supply
holder
ATTACH THE WORKSURFACE
13.
Attach the side brackets to the worksurface using four
(4) #10 x 1" wood screws (
D
).
Required: #2 Phillips Head Screwdriver or the Offset
Screwdriver.
(4) 10 x 1" wood screws
#2 Phillips Head
