Hipso
™
Assembly Instructions
© Knoll, Inc.
Page 2 of 12
B.
(4) Screw Socket
Round M8 x 16 ZN
C.
(4) ¼-20 x
5
/
8
"
Under-
cut Flathead, 100 degree
D.
(4) #10 x 1"
wood screws
A.
(8) Screw Socket
Flat Head M8 x 16 ZN
E.
(4 min/8 max)
#10 x 2½" wood screw
(2 min/10 max) Round
Bumpers
(2) Square Bumpers
Standard
Handset
Power Supply Holder
Side Brackets
Hardware
Feet
Adjustable Crossbars (shown facing opposite directions)
Power Supply
Control Box
P-Clips
Tools:
PROVIDED
• Small Allen Wrench
• Large Allen Wrench
• Combo #2/#3 Phillips Head
Offset Screwdriver
NOT PROVIDED
• Tape Measure
required
• #2 Phillips Head Screwdriver
recommended
• #3 Phillips Head Screwdriver
recommended
• Blanket or Other Floor
Protection
required
• A Friend
required
