background image

 

5

Introduction 

Congratulations and thank you for your 
excellent choice of a superior digital image 
projection device. Your new Knoll HD102 
projector is specifically designed for home 
cinema applications. The HD102 sets a high 
standard using the latest DLP™ technology 
and new DCDi Plus video processing from 
Faroudja™. Whether you are watching 
movies or High Definition broadcasts or 
playing the latest video game, you will enjoy 
amazing image quality. 

 

Product specifications 

 

To read the latest specifications on your 
multimedia projector, be sure to visit our 
website, as specifications are subject to 
change. Visit 

www.knollsystems.com

 for 

more information. 
 

Accessories 
 

The standard accessories that came with 
your projector can be found on the 
included packing list. Optional accessories 
are listed in the Accessories catalog 
that came with the projector and can also 
found on our website. See the inside back 
cover for the web address. 
 
 

 
 
 
 
 
 

 

 

 

Connector Panel 

 

The projector provides both computer and video 
connection options, including: 
 
• DVI (M1-DA) 
• Component SD/ED/HD (RCA) 
• S-video 
• Composite audio/video (RCA) 
 
The projector also provides the following 
connectors: 
• Audio out 
• 12-volt DC output (see next page) 
 
 
 
 
 
 
 
 

Содержание HD102





























Отзывы: