INSTALLATION
• Provide powered track to the required point of installation
• Remove the 2 screws securing the terminal cover (see Fig. 1)
• Remove the 2 loose ring terminals and the 2 pieces of heat shrink from inside the fitting
(see Fig. 2)
Fig. 1
Fig. 2
Remove the 2 screws
TRKAD Series
These instructions should be read carefully and retained after installation by the end user for future reference and
maintenance
These instructions should be used to aid installation of the following products:
TRKADBK / TRKADS / TRKADW
SAFETY
•
Installation of this product should only be carried out by a qualified electrician or competent person to the
latest Building and current IEE Wiring Regulations (BS7671)
•
Please isolate mains prior to installation/maintenance
•
Check the total load on the circuit (including when this product is fitted) does not exceed the rating of the
circuit cable, fuse or circuit breaker
•
Please note the IP (Ingress of Protection) rating of this luminaire when deciding the location for installation
•
This product is Class I and must be earthed
•
This product is IP20 rated
INSTALLATION
•
Provide powered track to the required point of installation
•
Remove the 2 screws securing the terminal cover (see Fig 1)
•
Remove the 2 loose ring terminals and the 2 pieces of heat shrink from inside the fitting (See Fig 2)
Fig 2
Remove the 2 screws
