BT14CT
These instructions should be read carefully and retained after installation by the end user for future reference and
maintenance.
These instructions should be used to aid installation of the following product:
BT14CT
SAFETY
•
This product must be installed in accordance with the latest edition of the IEE Wiring Regulations
(BS7671) and current building regulations. If in any doubt, please consult a qualified electrician.
•
Please isolate mains prior to installation or maintenance
•
Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating
of the circuit cable, fuse or circuit breaker
•
Please note the IP (Ingress Protection) rating of this luminaire when deciding the location for
installation
•
This product is Class II double insulated
•
This product is IP54 rated
•
This product is non-dimmable
INSTALLATION
•
Provide power to the required point of installation. Suitable IP rated junctions boxes should be used
where required
•
Remove the diffuser by rotating bezel anti-clockwise (see Fig. 1)
Fig. 1
•
Remove the fastening screw securing the LED plate, and open the LED plate (see Fig. 2)
Fig. 2
•
Mark the location of the fixing holes, and drill the holes ensuring not to infringe with any gas / water
pipes or electrical cables
•
Feed the cable via the rubber grommet to retain IP rating, and secure the baseplate to the surface
BT14C
T
These
instr
uct
ion
s sho
uld be read ca
refully
and reta
ined after install
atio
n b
y th
e end
user for f
utu
re reference a
nd
maint
ena
nce.
These
instr
uct
ion
s sho
uld be
used to a
id
insta
llat
ion of t
he fo
llowin
g product:
BT14C
T
SAFET
Y
•
This prod
uct m
ust be
insta
lled
in accorda
nce
with
the
latest
edition
of the
IEE W
irin
g Regul
atio
ns
(BS7671)
an
d curre
nt b
uildin
g regul
atio
ns.
If in
any
do
ubt,
pleas
e con
sul
t a qua
lified e
lectr
ici
an.
•
Please
iso
late m
ains pr
ior to
insta
llat
ion
or
main
tena
nce
•
Chec
k th
e total l
oad on t
he c
irc
uit (
inclu
din
g wh
en t
his
lum
inaire
is f
itted)
does
not e
xceed t
he rat
ing
of the c
irc
uit cab
le, f
use or c
irc
uit break
er
•
Please
note t
he
IP (
Ingress Protect
ion
) ratin
g of thi
s lu
min
aire
when
decid
ing t
he
locat
ion
for
insta
llat
ion
•
This prod
uct
is C
lass
II do
ubl
e in
sul
ated
•
This prod
uct
is
IP5
4 rated
•
This prod
uct
is
non
-dim
mab
le
INST
ALLAT
ION
•
Provide po
wer to t
he r
equi
red poin
t of in
stallat
ion
. Suitab
le
IP ra
ted jun
ctio
ns bo
xes s
houl
d be used
where req
uired
•
Rem
ove
the
diff
user
by
rotat
ing be
zel
ant
i-c
lock
wise
(see
Fig
. 1
)
Fig
. 1
•
Remov
e the faste
ning scre
w sec
urin
g the LED p
late, a
nd open t
he LED p
late
(see F
ig.
2)
Fig
. 2
•
Mark
the
locat
ion
of the f
ixing
hol
es, and dr
ill th
e ho
les
ens
urin
g n
ot to in
frin
ge wi
th a
ny gas /
water
pipes or e
lectr
ica
l cab
les
•
Feed the cab
le
via t
he
rubber grom
met to retai
n IP rat
ing,
and s
ecure t
he
baseplate to t
he s
urface
2
These instructions should be read carefully and retained after installation by the end user for
future reference and maintenance.
These instructions should be used to aid installation of the following product:
BT14CTEM
GENERAL INSTRUCTIONS
SAFETY
INSTALLATION
• This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671)
and current building regulations. If in any doubt, please consult a qualified electrician.
• Please isolate mains prior to installation or maintenance
• Check the total load on the circuit (including when this luminaire is fitted) does not exceed the rating of the
circuit cable, fuse or circuit breaker
• Please note the IP (Ingress Protection) rating of this luminaire when deciding the location for installation
• This product is Class II double insulated
• This product is IP54 rated
• This product is non-dimmable
• Mark the location of the fixing holes, and drill the holes ensuring not to infringe with any
gas / water pipes or electrical cables
• Feed the cable via the rubber grommet to retain IP rating, and secure the baseplate to the surface
• Connect the Live (brown), Emergency Live (L1) and Neutral (blue) to the terminals on the terminal block
(see Fig. 3)
• Provide power to the required point of
installation. Suitable IP rated junction
boxes should be used where required
• Remove the diffuser by rotating bezel anti-
clockwise (see Fig. 1)
• Remove the fastening screw securing the
LED plate, and open the LED plate
(see Fig. 2)
Fig. 1
Fig. 2
