Knight UniTech Warewash, Инструкция по эксплуатации

Страница: 11 / 24

0900591 Rev: A (07/04) Page 11 of 24
Continue on next page
If you wish to clear the rack counter, press the DOWN button. The display
will briefly flash to the rack counter to verify that it was set back to zero, and
will then return to the display at left. Press ENTER to continue.
‘DOWN’ KEY TO
RESET RACK COUNT
This menu item allows you to change the display name. Press the SCROLL
button once and you will see a screen with the current display name
showing. Use
/ to change the selected character (the one that is
underlined) and SCROLL to advance to the next character. When finished,
press ENTER to continue.
‘SCROLL’ TO CHAN
GE DISPLAY NAME_
This menu item allows you to change the pass code. Use / to change the
selected character (the one that is underlined) and SCROLL to advance to
the next character. When finished, press ENTER to continue
CHANGE PASS CODE
0000 PRESS ENTER
If you changed the pass code in the previous menu, you
will be prompted to confirm your choice. If you wish to pick
a different number, press SCROLL to return to the
previous menu, otherwise press ENTER to continue.
ARE YOU SURE?
0000_IS NEW CODE
Use SCROLL to choose door or conveyor as the type of dishmachine in use,
then press ENTER to continue.
MACHINE TYPE:
DOOR_
If you wish to clear the initial charge counter, press the DOWN button. The
display will briefly flash to the counter to verify that it was set back to zero,
and will then return to the display at left. Press ENTER to continue.
DOWN KEY TO RES
INIT CHARGE CNT_
This menu item will only appear if you have chosen probeless mode, and the
door setting as the type of dishmachine. The purpose of this menu item is to
allow the automatic initial charge feature (that is triggered by a rinse signal
longer than 30 seconds) to be disabled. Use the SCROLL button to choose
enabled or disabled, then press ENTER to continue.
NOTE: If the automatic initial charge is disabled, then only a detergent signal
will trigger the initial charge.
AUTO INIT-CHARGE
ENABLED_