Knick A405B, Руководство пользователя

Страница: 72 / 108

72
Measurement
Display Remark
or AM/PM and °F:
From the configuration or calibration menus, you can
switch the device to measuring mode by pressing the
meas key.
In the measuring mode the upper display line shows
the configured process variable (Cond, Conc or tem-
perature), the lower display line shows the time and
the second configured process variable (Cond, Conc
or temperature). The [meas] mode indicator lights.
Note:
• After prolonged power outage (> 5 days), the time
display is replaced by dashes and cannot be used
for processing. In that case, enter the correct time.
By pressing the meas key you can step through the different displays. When no
key has been pressed for 60 sec, the device returns to the standard display, see
“Display in Measuring Mode” on page 20.
Further displays
(each by pressing meas).
1) Display of tag number (“TAG“)
2) Display of time and date
(without figure)