Diaphragm liquid pump NF 100
Safety
KNF Flodos BA_NF100_EN_10_067676.docx
Translation of original Operating and Installation Instructions
6
The pumps comply with the fundamental requirements of Directive
2011/65/EU (RoHS2).
For the purposes of the Machinery Directive 2006/42/EC, pumps
are “partly completed machinery", and are therefore to be regarded
as not ready for use. Partly completed machinery may not be
commissioned until such time as it has been determined that the
machine in which the partly completed machinery is to be assem-
bled conforms to the provisions of the Machinery Directive
2006/42/EC. The essential requirements of Annex I of Directive
2006/42/EC (general principles) are applied and observed.
The following harmonised standards are met:
NF 100 AA / NF 1.100 AA
EN 55014 - 1
NF 100 DC / NF 1.100 DC
EN 55014 - 1
NF 100 DCB / NF 1.100 DCB
1)
EN 55011
EN 55022
EN 61000-4-3
NFB 100 DCB-4
1)
EN 55011
EN 55022
EN 61000-4-3
1)
In order to comply with the specified standards, the pump must be
connected as described in Chapter 6.2.
All repairs to the pump(s) must be carried out by the relevant KNF
Customer Service team.
Only use genuine parts from KNF for servicing work.
EU directives/standards
Customer service and
repairs
