background image

Operation

Diaphragm Pump N936

18

Translation of Original operating and installation instruction, English, KNF 320276-320275 09/19

8 Operation

8.1 General

WARNING

Risk of burns from hot pump parts and/or hot
medium

Some pump parts may be hot during or after oper-
ation of the pump.

à

Allow pump to cool after operation.

à

Take protective measures to protect against
touching hot parts.

WARNING

Injury to eyes

Coming too close to the inlet/outlet of the pump
may result in injury to the eyes due to the present
vacuum/operating pressure.

à

Do not look into the pump inlet/outlet during
operation.

à

Only operate the pumps in accordance with the operating parameters
and conditions described in Chapter 

Technical data

.

à

Ensure the proper use of the pumps (See Chapter 

2.1 

Proper use

).

à

Eliminate the possibility of improper use of the pumps (see Chapter 

2.2

Improper use

).

à

Observe safety notices (Chapter 

Safety

).

à

The pumps are built-in devices. Before they are commissioned, it must
be ensured that the machines or systems into which the pumps are in-
stalled comply with the relevant provisions.

Содержание N963

































Отзывы: