IECEx Certificate
of Conformity
Certificate No:
IECEx EUT 14.0001X
Issue No: 2
Date of Issue:
2019-02-08
Manufacturer:
ORANGE1 ELECTRIC MOTORS S.p.A.
Via Mantova, 93
43122 Parma
Italy
Additional Manufacturing location(s):
This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the
IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and
found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme
Rules, IECEx 02 and Operational Documents as amended.
STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply
with the following standards:
IEC 60079-0 : 2011
Edition:6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-1 : 2014-06
Edition:7.0
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2013
Edition:2
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
IEC 60079-7 : 2015
Edition:5.0
Explosive atmospheres – Part 7: Equipment protection by increased safety ''e''
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the
Standards listed above.
TEST & ASSESSMENT REPORTS:
A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in
Test Report:
IT/EUT/ExTR14.0001/02
Quality Assessment Report:
IT/EUT/QAR14.0001/03
Page 2 of 4
