KNF N 012 AT. 16 E страница 1 Скачать руководство пользователя

Страница: 1 / 24

KNF 121222-121485 08/11
Translation of original Operating and Installation Instructions, english

Operating and Installation Instructions

Diaphragm

Vacuum Pumps

and Compressors

Type range:

N 012 AT. 16 E N 024 AT. 16 E N 036 AT. 16 E

N 036.0 AT. 16 E

N 012 ST. 11 E N 024 ST. 11 E N 036 ST. 11 E

N 036.0 ST. 11 E

N 012 ST. 16 E N 024 ST. 16 E N 036 ST. 16 E N 036.0 ST. 16 E

N 012 ST. 26 E N 024 ST. 26 E N 036 ST. 26 E N 036.0 ST. 26 E

Fig. 1: N 012 ST.26 E

You have selected a high-quality KNF product; the following tips will help you operate it safely, and relia-
bly over a long period of time. Carefully study the Operating and Installation Instructions before using the
pumps and observe at all times the relevant instructions to avoid dangerous situations. The manual was
produced for the serial pumps stated above. With customer-specified projects (pump types starting with
“PJ“ or “PM“) there could be differences in detail. For customer-specified projects please therefore take
into account any agreed technical specifications, as well as these instructions.

List of Contents

Page

Description, Operating Conditions............................................ 2

Safety ....................................................................................... 4

Installation ................................................................................ 5

Operation.................................................................................. 8

Servicing................................................................................. 13

Cleaning ................................................................................. 18

Trouble Shooting .................................................................... 18

Spare parts and accessories.................................................. 21

Tables..................................................................................... 22

10.

Accessory ............................................................................... 22

11.

Decontamination Declaration ................................................. 23

KNF Neuberger GmbH
Alter Weg 3
79112 Freiburg
D-Germany
Phone +49-(0)7664 / 5909-0
Fax

+49-(0)7664 / 5909-99

E-Mail: [email protected]
www.knf.de

Содержание N 012 AT. 16 E

























Результаты поиска

Содержание N 012 AT. 16 E

Отзывы:

Похожие инструкции для N 012 AT. 16 E

Бренды по названию

Популярные бренды

KNF N 012 AT. 16 E, Руководство по эксплуатации и установке

Результаты поиска

Содержание N 012 AT. 16 E

Отзывы:

Похожие инструкции для N 012 AT. 16 E

Бренды по названию

Популярные бренды