Diaphragm liquid pump with linear drive FMM 80
Installation and connection
KNF Flodos AG BA_FMM80_EN_08_164464.docx
Translation of original Operating and Installation Instructions
11
6.3. Hydraulic connection
Only connect components to the pump that are designed to
handle the hydraulic data of the pump (see
Chapter 4
).
Only use hoses that are suitable for the maximum operating
pressure of the pump (see
Chapter 4
).
Only use hoses that are sufficiently chemically resistant to the
liquids being pumped.
The hydraulic connection can be made using hoses (
Section 6.3.1
)
6.3.1. Connecting the pump
Arrows on the pump head indicate the flow direction.
Remove the protective caps from the connections.
Connect the suction and pressure lines.
Keep the suction line as short as possible in order to keep the
priming process as brief as possible.
If the pump is used to build up pressure, make sure that all
transition joints between hose and pump are secure in order to
ensure that the hoses cannot come off.
Check that the hoses and transition joints are fitted correctly
and securely.
Check that the system is leak-tight.
Connected
components
Hoses
