KNF FL 10, Руководство по установке

Страница: 9 / 12

Installation Instructions FL 10 Initial start-up
KNF Flodos 173856_MA_FL10_EN_01.docx1
9
4 Initial start-up
The product must not be started up until it has been ensured that
the machine in which the product is to be installed meets the
requirements of the Machinery Directive 2006/42/EC, if applicable.
CAUTION
Danger of bursting of the fluid system due to overpressure.
The pump builds up pressure. With a closed system, the max.
permitted operating pressure may be exceeded, which can dam-
age the pump and the system.
 Prevent operation against a closed system
 Use only parts that come into contact with the fluid that are
designed to at least withstand the operating pressure of
the pump
 If necessary, take suitable measures to limit the maximum
system pressure
CAUTION
Danger of unexpected chemical reactions with water
Residues of water in the pump that come from testing in the
factory may react with the transferred medium.
 Before starting the pump for the first time, rinse it with a
medium that is uncritical as regards water
CAUTION
Danger from hot surfaces
The pump becomes hot during operation Burns from hot surfaces
or injuries from uncontrolled movements are possible.
 Do not touch the pump while it is operating.
 Ensure a sufficient supply of cool air and keep a safe dis-
tance between the pump and neighboring components.
 Operate the pump in accordance with the technical data
 If the temperature of the medium is above 50°C, take pre-
cautions to prevent burns from fluid components.
Before switching on the pump, check the following points:

All hoses attached properly
 Specifications of the power supply correspond with the data on
the pump’s type plate
 Pump discharge not blocked

All cables attached properly
 Contact protection for electrical connections and moving parts
installed