Setup Continued & Maintenance:
Step 5: Brake Adjustment
To engage the brake, depress brake lever on handle bar. The
KneeRover
®
All Terrain scooter comes equipped with a brake lock /
parking brake. Simply squeeze brake handle firmly and press the button
to engage the lock. To release the lock, squeeze the brake handle again.
If needed, the brake can be adjusted to avoid brake pad(s) from rubbing
a spinning back wheel with a disengaged brake. Use the provided
smaller allen wrench to make adjustments. Approaching the scooter
from behind you can loosen or tighten the brake cable by loosening the
top right bolt, adjusting brake cable, and re-tightening bolt.
Ongoing Maintenance
With routine use, nuts and bolts on the steering column, tie rod steering
mechanism, and brake assembly can become loose. To ensure safe
continuous operation of this KneeRover
®
scooter it is important to
periodically inspect the scooter for loose nuts and bolts and re-tighten
as appropriate. Also, check the tire pressure routinely to ensure that
tires are properly inflated between 22 and 28 psi. Be careful not to over
inflate the tires.
KneeRover
®
Jr. Set Up Instructions:
Please follow the step by step instructions on the following pages to
properly assemble your KneeRover
®
All Terrain scooter. The
diagram below identifies the key components of the scooter to aid
with assembly.
Hand Brake Lever
Pneumatic
10” Wheel
Basket
Knee Platform
Handlebar Height
Adjustment Knob
Quick Release Clamp
Knee Platform
Clamp
Steering Column
Brake Cable
Rear Brake
Mechanism
Tie Rods
Steering
Mechanism
Weight Capacity = 250 pounds
NEW & Improved
Removable Front
Axle
Top Right Bolt – Use
Allen Wrench
Brake Lock
