
36
Figure 7-11
Adjusting the grinding wheel
guard
7.10 Adjusting the grinding wheel guard (S 200 S | S 200 T)
To adjust the grinding wheel guard (7-11/1),
loosen the star handle (7-11/2) by turning
counter-clockwise.
Then slide the grinding wheel guard so that its
upper edge is approx. 5 mm below the grinding
wheel edge.
Then turn the star handle (7-11/2) clockwise to
tighten it.
7.11 Changing the grinding wheel (S 200 S | S 200 T)
For all work on the grinding machine, observe the locally applicable
safety and accident prevention regulations as well as instructions in the
“Safety” and “Important notes” section of the operating instructions.
CAUTION
There is a screw (7-12/1) in the center of the
grinding wheel.
Loosen the screw (7-12/1) with the hexagon
screwdriver provided (SW 5, located in tool box)
and remove the grinding wheel.
Clean the contact surface of the grinding wheel
on the clamping flange using a cloth.
The new grinding wheel is mounted in reverse
order.
ATTENTION
Only original grinding wheels approved by
KNECHT Maschinenbau GmbH may be used.
Incorrect grinding wheels can overheat the
cutting edges when grinding and cause blade
fractures (grinding cracks).
7. Operation
Figure 7-12
Changing the grinding wheels
1
2
1