11
• operating the circular knife grinding attachment with defective safety devices, or using
improperly attached or malfunctioning safety and protective equipment,
• failure to observe the instructions with regard to transportation, commissioning, operation,
maintenance and repair of the circular knife grinding attachment,
• unauthorized structural alterations to the circular knife grinding attachment,
• failure to monitor machine parts that are subject to wear, and
• use of unapproved replacement and wear parts.
Use only original replacement and wear parts. When using external parts, it cannot be guaranteed
that they are constructed and manufactured to be suitable and safe.
2.4 Safety regulations
2.4.1 Organizational measures
Inspect all available safety devices regularly.
Observe prescribed intervals for recurring maintenance work or as specified in the operating
instructions!
2.4.2 Protective equipment
Before commissioning the circular knife grinding attachment, always ensure that all protective
equipment is properly mounted and in functional condition.
Protective equipment may be removed only after the circular knife grinding attachment has
stopped and has been secured against accidental restart.
When delivering spare parts, the protective equipment must be attached by the operator as
stipulated.
2.4.3 Informal safety measures
The operating instructions must be permanently available at the place of use of the circular knife
grinding attachment. In addition to the operating instructions, the generally applicable as well as
locally relevant accident prevention regulations must also be made available and observed.
All safety and hazard warnings on the circular knife grinding attachment must be complete and
clearly legible.
2.4.4 Selection and qualification of personnel
Only trained and instructed personnel may work on the circular knife grinding attachment.
Observe the legally permitted minimum age!
2. Safety
