23
Disable the locking disc (7-8/1) by turning the star
handle (7-8/2) counter-clockwise by 1/4th of a
rotation.
Turn the hand wheel (7-9/3) in counter-clockwise
direction until the cutter knife (7-9/2) touches the
grinding belt (7-9/1).
Tighten the star handle (7-8/2) back again.
Turn the hand wheel (7-10/3) to the second
locking position of the locking disc (7-10/2).
NOTICE
Press with the thumb on the locking lever
(7-10/1) to move to the second locking posi-
tion. Turn the hand wheel (7-10/3) counter-
clockwise with the remaining four fingers.
7. Operation
2
1
Figure 7-8
Making the locking position inactive
Figure 7-9
Adjusting the cutter knife device
2
3
1
Figure 7-10
Turning the hand wheel to second
locking position
1
2
3