8
INFRARED TECHNOLOGY
PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120 V, 60 Hz power outlet and turn on
the unit . Only operate heater in upright position .
Insert two AAA batteries into the remote control before using (batteries not included) . *(Not all products
will include a remote control .)
Please note that infrared heaters do not heat like a traditional space heater . You should not expect
infrared heaters to blow hot air like a traditional space heater . Infrared heaters heat objects not air .
Infrared heaters are intended to supplement an already heated, insulated room . Square footage
specifications assume a single enclosed room not an entire home . Infrared heaters do not heat through
walls, floors, and are not intended to replace a main heat source . Infrared heat can take at least 24
hours to warm a room but operate much more efficiently to maintain the desired temperature . Infrared
heaters will not work well in uninsulated unheated spaces like screened in porches, RV’s, garages,
unheated basements, etc .
UNIT LEG ASSEMBLY
To assemble the unit feet align the foot to the
mounting bracket and press up firmly until se-
cured with a “CLICK” sound . For permanent
attachment you can secure the leg by adding
a screw into the pre-drilled hole (1 per leg) .
A
E