KMS UEGO, Руководство пользователя

Страница: 4 / 15

KMS UEGO Display manual
Version 1.01
4
•
9 pole connector serial port
This is the serial port to connect the
lambda controller to the KMS
management ECU for additional values
to be displayed . When you update the
firmware this cable has to be connected
to your pc.
•
6 pole connector to lambda sensor
Connect to wide-band lambda sensor.
Place your UEGO controller at a dry place where the temperature don’t exceed 65
°C.
(note : don’t place the UEGO controller and wires near any ‘high powered’ cables
like the cables for the sparkplugs, because of electrical interference.)