KMS Idle control kit, Руководство по установке и настройке, Страница: 5 / 20

__________________________________________________________
KMS idle control kit
Part nr: 01-01-01-008
5
kms.vankronenburg.nl
EN — NL — DE
EN
The idle-solenoid needs +12 Volt on one pin and a signal from the KMS management
on the other pin. You can change the polarity without influencing the functioning of
the valve.
To connect/wire the idle- control valve to the KMS ECU’s, use pin numbers 4 (MD35
only), 6, 22, 23 or 24 (MP25 only, see next page). For more information see also the
wiring examples on our website.
See figure below for correct wiring.
Buy SmartDraw!- purchased copies print this
document without a watermark .
Visit www.smartdraw.com or call 1-800-768-3729.