4
© 2018 KMC Controls, Inc.; KMC Controls
®
and ControlSet
®
are registered trademarks of KMC Controls
039-035-03B
KMC Controls, Inc.
19476 Industrial Drive
New Paris, IN 46553
574.831.5250
www.kmccontrols.com
MORE INFORMATION
For
mounting, wiring, auxiliary switches, feedback/direction
selectors, actuator/signal range reset (auto-mapping)
, and
other information, see the
MEP-46xxQ Series Installation
Guide
.
For
torque selection, accessories, troubleshooting,
and other
information, see the
Installation
Connections
Power/Signal
Prewired 3-foot, 18 AWG cable or
fixed wire clamp terminal block,
12–26 AWG, copper (see
)
Aux. Switches
3-foot 18 AWG cable
Mounting
Direct to 1/4 to 5/8 inches (6 to 16
mm) round or 1/4 to 7/16 inches (6
to 11 mm) square shaft by adjusta-
ble “V” bolt and supplied non-rota-
tion bracket; minimum recommend-
ed damper shaft length is 1-5/8
inches
Brackets
non-rota-
tion bracket included*
Dimensions
6.000 x 2.812 x 3.406 inches
(152.4 x 71.4 x 86.5 mm)—see
Weight
1.5 lb. (0.68 kg)
Enclosure
UL94-5VA flame-retardant polymer,
NEMA 2 and IP54—to guarantee
uid-tight cord grip
Servicing
Maintenance free
Environmental Limits
Operating
–22 to 131° F (–30 to 55° C)
Shipping
–40 to 176° F (–40 to 80° C)
Humidity
5 to 95% RH (non-condensing)
*NOTE: The two holes at the top of the actuator are NOT
for use in direct-coupled applications.
They are for
remote
mounting, such as with the optional
crank arm kit.
Warranty, Quality, and Approvals
KMC Limited Warranty
5 years (from mfg. date code)
Quality Standard
ISO 9001
Approvals
UL
UL 873 Temperature Indicating and
Regulating Equipment
FCC
FCC Class A, Part 15, Subpart B and
complies with Canadian ICES-003
Class A*
*This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.