KMC Controls 64 Series, Руководство оператора

Страница: 20 / 36

18
OPERATIONAL SETUP
TRACTOR PREPARATION:
Before operating implement refer to tractor operator’s manual for information concerning safe methods
of operation, hydraulics, hitch adjustment, tire inflation, wheel adjustments and tractor weights.
Check tractor brakes and warning lights, make sure they are in proper working order.
Check tractor hydraulics oil reservoir and add oil if needed.
IMPORTANT: It is recommended that the tractor’s Draft Control Feature be disengaged for optimal
performance of this tool.
WARNING
TRANSPORTING THE IMPLEMENT WILL ADD SIGNIFICANT WEIGHT TO
YOUR TRACTOR. MAKE SURE THE TRACTOR IS PROPERLY BALLASTED.
Front-End Weights:
Use front-end weights as needed to provide effective steering control and front-end stability.
See your tractors Operator’s Manual for recommendations on ballasting procedures.
WARNING
DO NOT EXCEED THE TRACTOR’S LIFT CAPACITY OR BALLAST
RECOMMENDATIONS.
Horse Power Requirements:
The power requirement for this implement is a minimum of 55 HP PTO. Select a tractor with sufficient
power to operate this machine.
Sway Blocks
Sway blocks should be used and adjusted to limit movement in operating position. Your implement
should be permitted to sway very little while operating and should be held rigid while transporting.
See your Tractor Operator’s Manual.
Wheel Spacing
Set tractor wheels so they are equally spaced from center of tractor. If using the tool to penetrate in
fields for row crops, set tractor wheels so they are centered between the rows.
See your Tractor Operator’s Manual for correct tire inflation pressure.
Drawbar Position
Place the drawbar in the short, center position to provide maximum clearance between drawbar and
tool.