Now enter editing mode by pressing and holding the
until the value gets flashing.
As soon as the value flashes, release the
. Now you can change it. Increase primary value by pressing of the
. If you
keep it pressed two-speed autorepeat helps to reach target value quickly. Then use multiple pressing of the
and
for
fine setup.
To change the secondary value, simply press the
. The button serves as toggle switch between 5 and 1.
CT Ratio Change Procedure Example
Target CT value is prepared now and we can leave the edit mode with (short) pressing the
. The value is stored into the
instrument memory and the flashing stops.
Now return to so called main parameter branch (see below) with next pressing the
and then you can scroll to other
parameters with
and
and edit them in a similar way or you can return to the measured data branch with the
.
The summary of all instrument parameters is stated in the table below. Their description is stated in following chapters.
long
multi
ple