2
Assembly Instructions:
1) The scooter folding and unfolding operations are to be performed by an adult.
2) During these operations, be careful not to pinch your fingers in the hinge and
locking system.
3) Make sure that all the locking mechanisms are securely locked.
Unfold the scooter
Assembly handlebar
WARNING! Failure to tighten the handlebar fully may result in the scooter unsafe.
1. Grasp the steering tube (A) with
one hand, and raise it up to full
unfolding.
2. Then push and turn both of the
folding knob (B) clockwise with the
other hand to tighten. Please make
sure that both of the knobs are
tightened completely.
Warning: Be careful not to pinch
your fingers when you do the
operation.
A
B
1. Loosen the two bolts which fixed in
the steering tube.
2. Place the handlebar set onto the
center of the steering tube.
Note: The brake lever should be in
the right hand.
3. Keep stem cap of the handlebar
aligned with the cap in the steering
tube and use the hex key to tighten
the two bolts to assembly. Make
sure the handlebar can not be
moved forward and backward.
