KMART 43033430, Руководство пользователя

Страница: 12 / 24

10
Parts Assembly
Rear Wheel Installation
Steps:
1.Install the Rear Wheels (14) as shown.
The rear bushings are pre-installed into the
Frame (12) on most models. If they are not
pre-installed, push each into the frame until
it is fully seated.
2.One washer(15) and Nut(16) are installed
on one end of the Axle(13). Slide one wheel
onto the Axle with Hub Cap facing out.
3. Slide the Axle through the Frame.
4.Slide the other Wheel onto the Axle and
install the other Washer and Nut.
5.Tighten this assembly by holding both nuts
with the included Sockets.
6.Install an Axle Cap (17) onto each side.
WARNING: The nylon locking nuts must be engaged on the thread to ensure rear
wheels do not come loose from the axle.
15 16
X 2
X 2
12
16
17
3 1
4 1
17
15
16 15
14
FINAL
STEP
FINAL
STEP
NOTE: Please make sure that the convex
part on the plastic bowl fixed with the
concave part on the rear wheel.
concave
part