background image

1

Important Safety Notice

Note the following precaution before assembling or operating the equipment.

1. Assemble this equipment as per the installation directions in the instruction manual.

2. Check all the screws, nuts and other connection components prior to first use and regularly

throughout the life of the equipment.
3. Set up the equipment on a dry and level surface and keep away from children.
4. Place a suitable base (e.g. rubber mat, wooden board etc.) beneath the equipment in the area
of assembly to avoid dirt and etc.
5. Before beginning training, remove all objects within a radius of 2 meters from the equipment.
6. only use the supplied tools or suitable tools of your own to assemble the equipment or repair
any parts of equipment.
7. Your health can be affected by incorrect or excessive training. Consult a doctor before
beginning the training program. He can define the maximum setting (Pulse. Watts. Duration of
training etc) to which you may train yourself and can get precise information during training. This
equipment is not suitable for therapeutic purpose.
8. Only do training on the equipment when it is in correct working way. Use only original spare
parts for any necessary repairs.
9. This equipment can be used for only one person’s training at a time.
10. You can only mount and dismount the equipment safely with two hands grasping the handles
when the equipment is stopped and one of the pedals is in lowest position.
11. Always check and adjust the plastic covers at the two ends of the front and rear stabilizer by
rotating slowly to ensure the base of equipment is stable before using.
12. The cross trainer is not equipped with a free wheel and therefore the moving parts can not be
stopped immediately.
13. Wear training clothes and shoes that are suitable for fitness training with the equipment. Your
training shoes should be appropriate for the cross trainer.
14. If you have a feeling of dizziness, sickness or other abnormal symptoms, please stop training
and consult a doctor immediately.
15. People such as children and handicapped persons should only use the equipment in the
supervision of another person who can give aid and advice.
16. The power of the machine increases with increasing the speed, and the reverse. The
equipment is equipped with adjustable knob that can adjust the resistance.
17.

P

lease be sure that you operate cross trainer according to the instruction manual, periodically

check all the parts for signs of wear or damage. If you find defective parts or there is noise when
use in the process of assemble and repair, stop operation and use at once, make sure all
problems are solved prior to continue to use.
18. The resistance of the product can be adjusted, please select the appropriate resistance.
19. Product is in compliance with EN 20957-1 & 9 CLASS HC. Suitable for domestic home use
only.

Содержание 42956952










Отзывы: