Technical manual
360-drive page 15 of 26
6. Transportation, installation, discard
6.1 Transport
The loading and unloading and transporting the 360 drive should be done with great care to
avoid damage and accidents.
When transporting 360 drive key must first be removed from the ignition and
battery terminals should be decoupled.
6.2 Storage of the 360-drive
When 360-drive is storaged for a long time, take the magnetic key off the
tillerhead and disconnect the batteries.
If 360 drive is not used for a long period of time due to long transport and / or storage, and
the battery is not recharged regularly, it may be that this is over-discharged. For proper
functioning, the battery should first be fully charged again.
6.3 Disposal of the machine
If 360 drive are disassembled, the requirements for waste observed have to be in force at the
place and at the time of disassembly.
In 360 drive are only made of generally known materials. At the time of the construction
waste disposal options exist for this and there were no special risks known for the persons
responsible for the dismantling work.
.
Batteries should be at a collection point for chemical waste to be returned.