Page of 18
18
WARRANTY
EFFECTIVE JULY 1, 2014
LIMITED WARRANTY
This warranty applies to the original purchaser and is subject to the terms and conditions listed below. This Limited Warranty is for
new equipment sold after the above date, providing coverage for defects in material and workmanship at the time it is shipped from
the factory.
Limited to the warranty periods below, Northern Tool + Equipment will repair or replace the item under warranty that fails due to
defects in material and workmanship. Northern Tool + Equipment must be notified within 30 days of the failure, so as to provide
instructions on how to proceed with the repair of your welder and warranty claim processing. Warranty period begins at the time the
welder is purchased from Northern Tool + Equipment.
Keep your receipt as proof of purchase.
Engine Warranty
Then engine on this unit is warranted separately by the engine manufacturer. Please see the engine manual.
Warranty Periods
Limited Warranty is divided into four categories. No Warranty, 90 days, 1 year and 3 year.
No Warranty
Normal wear items, MIG gun parts (contact tips, nozzle, contact tip adapter, MIG gun liner), drive roll, electrode holder, ground
clamps, Plasma torch parts (nozzle, electrode, diffuser, cover) are considered consumable items and are not covered under
warranty.
90 days
Parts for Northern Tool + Equipment welding carts and welding cabinets. This warranty covers the absence of or defective parts.
1 year
Parts and Labor on MIG gun parts (except those listed under normal wear items), cables, regulator, plasma torch (except those
listed under normal wear items). Any shipping related to warranty repair is the responsibility of the customer.
1 year/3 year
Please see your product information to determine if your product has a 1 year or 3 year warranty. This warranty covers parts and
Labor on items such as: transformer, reactor, rectifier, solenoid valve, PC Board, switches, controls, gas valve, drive motor, drive
system other than drive roll and any other component that requires the removal of the sheet metal to access. Any shipping related
to warranty repair is the responsibility of the customer.
Voiding Warranty
Warranty does not apply to: Shipping Damage, Misuse and abuse of the unit, alteration of the unit in any way.
Warranty Claim
This is a parts and labor warranty. Do not return your unit. Retain your receipt in the case a warranty claim is needed. No warranty
will be provided without the original receipt from Northern Tool + Equipment. To make a warranty claim, call our welder help line at
877-304-0294, M-F 8:00 am to 5:00 PM Central time or email [email protected].
Distributed by
Northern Tool + Equipment Co., Inc.
Burnsville, Minnesota 55306
NorthernTool.com
Made in China
