5 OF 7
1. Make sure that the air valve (or trigger) is in the “off” position before connecting to the air
supply.
2. An air pressure of 90 PSI. is required.
3. Drain the air tank daily. Water in the airline can damage the tool.
4. Clean the air inlet filter weekly.
5. Line pressure should be increased to compensate for longer air hoses (over 26 feet or 8
meters). The hose diameter should be 3/8in. I.D.
6. Keep the hose away from heat, oil and sharp edges. Check the hose for wear and make
certain that all connections are secure.
MAINTENANCE
WARNING: Make sure the Impact Wrench is disconnected from its power source before attempting
any maintenance, cleaning, or inspection.
·
Maintain your Impact Wrench. It is recommended that the general condition of any tool be examined
before it is used. Keep your Impact Wrench in good repair by adopting a program of conscientious
repair and maintenance in accordance with the recommended procedures found in this manual. If any
abnormal vibrations or noise occurs, turn the Impact Wrench off immediately and have the problem
corrected before further use. Have necessary repairs made by qualified service personnel.
·
Keep all cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control. Keep handles dry, clean, and free from oil and grease.
·
Cleaning. Use only soap and a damp cloth to clean your Impact Wrench. Many household cleaners are
harmful to plastics and other insulation. Never let liquid get inside the Impact Wrench.
