KLUBB KAT 42, Руководство пользователя

Страница: 48 / 56

45
INTRODUCTION
Good maintenance and correct use are essential requirements to guarantee good machine performance and safety. To ensure
constant, normal machine operation, original spares supplied by the manufacturer must be used any time a part is replaced.
Failure to adhere to these terms may result in the warranty being void and the transfer of all liability to the owner.
The machine you have purchased or hired has undergone compliance testing followed by pre - delivery servicing, which
guarantees the machine has been commissioned correctly and all the necessary checks and adjustments have been made.
NOTE!! The maintenance operations outlined in this manual are given for normal use conditions. In extreme conditions
(extreme temperatures, high humidity, atmospheric pollution, high altitudes, etc.), certain maintenance operations
must be carried out more frequently and special precautions taken; for use in these conditions, contact the
manufacturer.
PERIODIC CHECKS
After the initial commissioning, the machine must undergo checks by the designated authority (as per UK law) at least once
every six months or in compliance with UK regulations.
The owner of the truck is the sole party responsible for ensuring all inspections are carried out.
Look out for any wear which could give rise to hazardous situations (safety devices, load limiters, tilt control devices, leakage
from outriggers, deformation/warping, welding condition, tightness of bolts, hoses, electrical connections, tyre condition, and
excessive mechanical play).
For the machine's fatigue resistance, in compliance with standard EN 280, reference is made (to err on the side of caution) to a
heavy
- duty use equivalent to a fatigue dimension of 100,000 cycles.
According to standard EN 13001 - 3 - 1 (Table 10), the machine is classified as follows:
- Superstructure: class S1
- Substructure: class S0
After a ten - year life cycle, operating at full capacity, a thorough check of the machine/truck assembly should be performed by
an authorised service centre.
NOTE!! If the machine is hired, the user responsible for the machine is required to ensure the condition inspection and the
suitability check are carried out. The user must check with the hire firm that the general and routine checks and the
commissioning inspections have actually been carried out.
REPAIRS AND ADJUSTMENTS
Major repairs or operations on the safety systems or features (related to mechanical, hydraulic, electrical, and electronic
systems) and all adjustments must only be performed by an agent authorised by the manufacturer.
Changes made outside the control of the manufacturer are not authorised.
5.1 MAINTENANCE: AN INTRODUCTION
www. duma -rent.com