Laser Surgical Unit diomax
®
Revision 6
11
2
Notices Concerning this Document
Non-observance of this document can lead to serious or even lethal patient injury!
Improper handling and care as well as non-intended use can lead to premature wear and/or
pose a risk to patients and users!
Be sure to read, understand and follow the instructions given below!
•
Every user is required to read this document completely and follow them carefully.
•
In particular, be sure to heed all cautions, warnings and danger notices.
•
Keep this document accessible to users at all times.
2.1
Validity of this Document
These instructions for use are valid for software version V5.00 or higher hardware release
HW 03and software version SW 04.
The software version currently installed in your diomax
®
is indicated on the initial screen (see
section 5.7 “System Check”, page 40). If older hardware and software versions are used, it
may be that newer functions described in this document are not available. On the startup
screen, the diomax
®
software indicates which version of this document matches the software
version currently implemented, see section 5.7 “System Check”, page 40. This ensures that it
is always clear which software versions are covered by this document. If the software version
of the unit does not match the version in the Instructions of Use, the appropriate
documentation can be obtained from the Martin Service Center.
