KLR KLR.937, Руководство пользователя

Страница: 35 / 45

KLR.937 Revision: 2021-04-14
Serial numbe
rs: 2218 - beyond
34
10.0: CHECK LIST
START UP CHECK LIST FOR INK JET PRINTER KLR.937
CUSTOMER : ___________________________________
Function
Where Tasks Check
N/A Write the following information:
-Revision of software: __________________________________
-Serial of the printer head _______________________________
-Serial of KLR.950 it is installed on: ________________________
☐
N/A
☐
Interior Make sure the power supply is set to 28vdc
☐ N/A ☐
Make sure the wire of the encoder is passing by a path reasonably far
from the pinch point generated by the big gear of the breaking
system.
☐
N/A
☐
Top
assembly
Verify the ink jet head is perpendicular to the clips.
☐
N/A
☐
Make sure the 3D printed clench is installed on the print head
☐
N/A
☐
Clips Print a series of clips with a test layout.
☐
N/A
☐
Does the costumer has sent his desired print layout
☐
NO
☐
YES
Configure and print the layout of the customer (or default layout)
☐
DEFAULT
☐
CUSTOM
Test What type of cartridge has been used during the tests (ex: W3T10B)
DATE: ______________________ TECHNICIAN SIGNATURE: ________________________________
11.0: DECOMMISSIONING OF THE PRODUCT
It is advisable to plan a tour of KLR to reinstall the equipment after a prolonged deactivation or a move,
destruction, recycling, disposal.