klover DEA ECO 6, Руководство пользователя

Страница: 98 / 139

29
EN
G
L
ISH
PCB PARAMETERS
THE PARAMETERS STORED ON THE PCB ARE ESSENTAL FOR THE CORRECT OPERATION OF THE
STOVE.
THE PARAMETERS SHOWN BELOW ARE STORED DURING THE STOVE TESTING PHASE DIRECTLY
AT THE FACTORY.
THESE PARAMETERS STEM FROM ACCURATE TESTS WITH VARIOUS TYPES OF PELLETS AND
MUST NOT BE MODIFIED WITHOUT PRIOR AUTHORISATION FROM KLOVER srl, IN ORER TO AVOID
JEOPARDISING THE STOVE'S OPERATION.
THE COMPANY SHALL NOT BE HELD LIABLE FOR ANY DAMAGES CAUSED BY INCORRECT
PARAMETER ENTRY.
“Factory calibrations” (Menu M8 – 1) (Firmware H01_050515)
Parameter Description Display text
Unit of
measurement
Value field Database o0
Pr01 Ignition cycle maximum time IGNITION MINUTES Minutes 5 – 25
20
Pr02 Start time START MINUTES Minutes 2 – 20
4
Pr03
Time interval between the two brazier
cleaning operations
CLEANING
FREQUENCY
Minutes 10 – 255
60
Pr04
Screw feed gearmotor ON time in ignition
phase
SCREW FEED ON Seconds 0.1 – 4.0
1.0
Pr05
Screw feed gearmotor ON time in start
phase
SCREW FEED START Seconds 0.1 – 4.0
0.8
Pr06
Screw feed gearmotor ON time in power 1
work phase
P1 SCREW FEED Seconds 0.1 – 4.0
1.0
Pr07
Screw feed gearmotor ON time in power 5
work phase
P5 SCREW FEED Seconds 0.1 – 4.0
2.8
Pr08
Flue gas extraction speed in brazier
cleaning phase
EXTRACTOR
CLEANING
RPM 700 – 2800
2800
Pr09
Screw feed gearmotor ON time in
cleaning phase
CLEANING SCREW
FEED
Seconds 0.0 – 4.0
0.8
Pr10
Flue gas extractor switch-off threshold (in
switch-off phase)
THRESHOLD OFF °C 50 – 180
70
Pr11 Alarm delay ALARMS DELAY Seconds 20 – 90
30
Pr12 Brazier cleaning duration CLEANING DURATION Seconds 0 – 120
50
Pr13
Flue gas minimum temperature for
considering the stove on
MINIMUM THRESHOLD °C 35 – 180
43
Pr14 Flue gas maximum temperature
MAXIMUM
THRESHOLD
°C 60 – 280
250
Pr15
Flue gas temperature threshold for
starting the heat exchangers
FAN THRESHOLD °C 50 – 210
60
Pr16
Flue gas extraction speed in ignition
phase
EXTRACTOR ON RPM 500 – 2800
2200
Pr17 Flue gas extraction speed in start phase EXTRACTOR START RPM 500 – 2800
1900
Pr18
Flue gas extraction speed in power 1 work
phase
EXTRACTOR P1 RPM 500 – 2800
1400
Pr19
Flue gas intake speed in power 5 work
phase
EXTRACTOR P5 RPM 500 – 2800
1900
Pr20
Heat exchanger 1 motor speed in power 1
work phase
AIR P1 Volt 65 – 225
180
Pr21
Heat exchanger 1 motor speed in power 5
work phase
AIR P5 Volt 65 – 225
225